Recording

To compensate the exposure using the function lever, set [Function Lever] (P20) in the [Custom] menu to [EXP.].

When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the built-in flash will automatically be set to the level appropriate to the selected Exposure Compensation. (P145)

When the exposure value is out of the j3 EV to i3 EV range, the brightness of the recording screen will no longer change. It is recommended to record by checking the actual brightness of the recorded image in the Auto Review or playback screen.

The set exposure value is memorized even if the camera is turned off.

When the aperture and shutter speed values are displayed in the screen in the Program AE Mode, Program Shift operation and Exposure Compensation operation is switched every time the rear dial is pressed.

In the Aperture-Priority AE Mode, Aperture Setting operation (P99) and Exposure Compensation operation is switched every time the rear dial is pressed.

In the Shutter-Priority AE Mode, Shutter Speed Setting operation (P100) and Exposure Compensation operation is switched every time the rear dial is pressed.

Not available in these cases:

The compensation range of the exposure will be limited depending on the brightness of the subject.

150

Page 150
Image 150
Panasonic DMC-G6 owner manual 150, Not available in these cases