Panasonic DMC-G6 owner manual 289, Delete, Displays the MAC address and IP address of this unit

Wi-Fi/NFC

[Touch Sharing]

Sets a picture transfer that uses the NFC function.

[ON]:

When a connection is established with the NFC function during single picture playback, the picture can be transferred.

[OFF]

[Wi-Fi Password]

To prevent incorrect operation or use of the Wi-Fi function by a third party and to protect saved personal information, it is recommended that you protect the Wi-Fi function with a password.

Setting a password will automatically display the password input screen when the Wi-Fi function is used.

[Setup]:

Enter any 4-digit numbers as the password.

Exit the menu after it is set.

[Delete]:

Confirmation screen is displayed. It is executed when [Yes] is selected.

Exit the menu after it is executed.

•For details on how to enter characters, refer to “Entering Text” section on P64.

•Make a copy of password. If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however other settings will also be reset. (excluding [LUMIX CLUB])

[Network Address]

Displays the MAC address and IP address of this unit.

•A “MAC Address” is a unique address that is used to identify network equipment.

•“IP address” refers to a number that identifies a PC connected to a network such as the Internet. Usually, the addresses for homes are automatically assigned by the DHCP function such as a wireless access point. (Example: 192.168.0.87)

[Approved Regulations]¢

Displays the certification number for radio regulations.

¢[Approved Regulations] is only available on the version DMC-G6P.

289