Panasonic DMC-G6 owner manual 168, Not available in these cases

Recording

When selecting [ ]

You can set the focus position precisely by enlarging the screen.

•The focus position cannot be set at the edge of the screen.

1Touch the subject.

•The assist screen for setting the focus position is enlarged to approximately 5 times original size.

•The assist screen can also be displayed by pressing 2, pressing 4 to display the enlarged position setting screen, and then selecting the enlarged position using the cursor buttons and pressing [MENU/SET].

ュリヴヱハ 5HVHW

2Drag the screen to align the subject on the cross point of the crosshair in the center of the screen.

•It is also possible to move the focus position with the cursor button.

•Touching [Reset] will bring the focus position back to the center position.

•On the assist screen, it is also possible to record a picture by touching [ ].

Setting the duration for which the screen is enlarged [MENU] > [Custom]>[Pinpoint AF Time]>

[LONG] (Approx. 1.5 seconds)/[MID] (Approx. 1.0 second)/[SHORT] (Approx. 0.5 second)

Moving/not moving the AF area with the cursor button [MENU] > [Custom]>[Direct Focus Area]>[ON]/[OFF]

When [š], [ ], or [Ø] is selected, the AF area can be moved; when [ ] is selected, the enlarged position can be moved.

•To set the items that use the cursor buttons like [Drive Mode], [White Balance], or [Sensitivity], use the Quick Menu (P48) instead.

•The spot metering target can also be moved to match the AF area when the [Metering Mode]

(P190) is set to [ ]. At the edge of the screen, the metering may be affected by the brightness around the AF area.

•When [Touch AF] is set to [AF+AE], the brightness optimization position follows the movement of the AF area. (The AF area works as [Ø].) (P152)

Not available in these cases:

•[Direct Focus Area] is fixed to [OFF] in the following case.

– Creative Control Mode

•When using digital zoom, the position and size of the AF area cannot be changed.

168