258
Wi-Fi/NFC
1Select the menu.
2Select [Via Network] or [Direct], and connect. (P280)
3Select a device you want to connect.
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P287)
4Select [Single Select] or [Multi Select].
To change the setting or disconnect, press [Wi-Fi]. (P245)
Sending selected images ([Send Images Stored in the Camera])
[Wi-Fi] >
[New Connection]
>
[Send Images Stored in the Camera]
>
[Smartphone]
On your smartphone/tablet
When connecting with [Via Network]:
1Turn on the Wi-Fi function.
2Select the wireless access point you want to connect to, and set.
3Start “Image App”.¢ (P248)
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1Start “Image App”.¢ (P248)
When connecting with [Manual Connection] in [Direct]:
1Turn on the Wi-Fi function.
2Select the SSID that matches the one displayed on the screen of this unit, and
then enter the password.
3Start “Image App”.¢ (P248)
¢A window indicating that the smartphone/tablet is connecting to the camera is
displayed. If you are using an Android device, press the back key. If you are using an
iOS device, close the window.
[Single Select] setting
1Select the picture.
2Select [Set].
[Multi Select] setting
1Select the picture. (repeat)
The setting is canceled when the picture is selected
again.
2Select [OK].
The number of pictures that can be sent by [Multi
Select] is limited.
Confirmation screen is displayed. It is executed when [Yes] is selected.
6HW
2.
DMC-G6PDF-VQT4Z78_eng.book 258 ページ 2013年4月25日 木曜日 午前10時5分