Wi-Fi/NFC

If you are not sure about the WPS compatibility (connecting by [Manual Connection])

Search for available wireless access points.

Confirm encryption key of the selected wireless access point if the network authentication is encrypted.

When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless access point you are using.

1Select the wireless access point you are connecting to.

Pressing [DISP.] will search for a wireless access point again.

If no wireless access point is found, refer to When connecting with [Manual Input]on P282.

2(If network authentication is encrypted) Enter the encryption key.

For details on how to enter characters, refer to Entering Textsection on P64.

When connecting with [Manual Input]

1On the screen displayed in step 1 of “If you are not sure about the WPS compatibility (connecting by [Manual Connection])”, select [Manual Input].

2Enter the SSID of the wireless access point you are connecting to, then select [Set].

For details on how to enter characters, refer to “Entering Textsection on P64.

3Select the network authentication type.

For information on network authentication, see the manual of the wireless access point.

4Select the encryption type.

The type of settings that can be changed may vary depending on the details of network authentication settings.

Network authentication type

Encryption types that can be set

 

 

[WPA2-PSK]/[WPA-PSK]

[TKIP]/[AES]

 

 

[Common Key]

[WEP]

 

 

[Open]

[No Encryption]/[WEP]

 

 

5(When an option other than [No Encryption] is selected) Enter the encryption key.

Check the wireless access points instruction manual and settings when saving a wireless access point.

If no connection can be established, the wireless access point’s radio waves may be too weak. Refer to Message Display(P318) and Troubleshooting(P331) for details.

Transmission speed may decrease, or may not be usable depending on the environment it is used in.

282

Page 282
Image 282
Panasonic DMC-G6 282, Select the wireless access point you are connecting to, When connecting with Manual Input