Others

The brightness or the hue of the recorded picture is different from the actual scene.

When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed may introduce slight changes to brightness and color. These are a result of the characteristics of the light source and do not indicate a malfunction.

When recording subjects in extremely bright locations or recording under fluorescent lighting, LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may change or horizontal striping may appear on the screen.

Bright spot not in subject is recorded.

There may be defective pixels in the image sensor. Perform [Pixel Refresh] (P63).

You cannot compensate the exposure.

Are you in Exposure Compensation operation?

>Press the rear dial to switch to Exposure Compensation operation. (P149)

The function lever does not work.

>Set the [Function Lever] to [AUTO]. (P20)

Subject cannot be locked. (AF tracking not possible)

If the subject contains sections that differ in color to the surroundings, touch those sections or the main colors of the subject to set the AF frame (P165).

Operation sound is small.

Is your finger covering up the speaker? (P14)

Recording by Panorama Shot Mode is ended before finishing.

If the camera is moved too slowly, the camera has assumed that camera motion was stopped and will end the still picture recording.

If there is a great deal of shaking towards the recording direction while moving the camera, recording will end.

334

Page 334
Image 334
Panasonic DMC-G6 owner manual 334