64
Preparation

Entering Text

It is possible to enter babies’ and pets’ names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
1Display the entry screen.
You can display the entry screen via the following operations.
[Name] in [Face Recog.] (P174)
[Name] of [Baby1], [Baby2] or [Pet] in [Profil e Setup] (P176)
[Location] in [Travel Date] (P46)
[Title Edit] (P196)
[LUMIX CLUB], [Device Name], [ External AV device], [Wi-Fi Password], [Registe r to
Favorite] (P215) in the [Wi-Fi Setup] (P244) menu.
2Press 3/4/2/1 to select text and then press

[MENU/SET] to register.

Move the cursor to [ ] and then press [MENU/SET] to switch
text between [A] (capitals), [a] (lower case), [1] (numbers) and
[&] (special characters).
To enter the same character again, rotate the control dial right to move the cursor.
The following operations can be performed by moving the cursor to the item and
pressing [MENU/SET]:
[]]: Enter a blank
[Delete]: Delete a character
[ ]: Move the entry posit ion cursor to the left
[ ]: Move the entry position cursor to the right
3Press 3/4/2/1 to move the cursor to [Set] and then press

[MENU/SET] to end text input.

Text can be scrolled if all of the entered text does not fit on the screen.