- 116 -
Recording

Applicable modes:

When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
The exposure meter is displayed, and the aperture and shutter speed are chang ed to give a
suitable exposure. Which items of the settings change will depend on the Recording Mode.
In the following cases, suitable exposure cannot be set. (Exposure meter is displaye d)
When the subject is extremely dark and it is not possible to achi eve adequate exposure by
changing the aperture value or shutter speed
When recording using the flash
In Preview Mode (P115)
When using a lens that includes an aperture ring
Note
In Program AE Mode, you can cancel program shift by pressing function button.

Easily set aperture/shutter speed for suitable exposure (One Push AE)

How to tell if the exposure is not adequate
If the aperture values and shutter speed blink red A when the shutter
button is pressed halfway.
If the Manual Exposure Assistance is anything other than when
in Manual Exposure mode. For more details on Manual Exposure
Assistance, refer to P119.
1Set the [Fn Button Set] of the [Custom] menu to [One Push AE].
This is the procedure for setting [Fn1].
2(When exposure is not adequate) Press [Fn1].
Recording
Mode Settings that change
Aperture value
Shutter speed
Aperture value/Sh utter speed
1
6
4000
4000
40003.5
3.5
3.5
00
-
3
-
3
A
16
0

SSSSSS

F

15 250
4.0 5.6 8.0
1256030
6060603.5
0
16
0
4000400040003.53.53.5
00
-
3
-
3