- 92 -
Recording
5Focus on the subject and take a picture.
AAuto Bracket indication
If you press and hold the shutter button, the number of pictures that you
set is taken.
The Auto Bracket indication blinks until the number of pictures that you set is taken.
The picture count is reset to [0] if you change the Auto Br acket setting or turn the camera off
before all the pictures that you set are taken.
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1Select [Auto Bracket] in the [Rec] menu. (P64)
2Touch [Single/Burst Settings], [Step] or [Sequence].
3Touch the setting.
You can take one picture at a time when set to [ ].
You can continuously take pictures up to set numbers when set to [ ].
Exit the menu after it is set.
Note
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
The exposure may be compensated incorrectly, depending on the brightness of the subject.
When taking pictures continuously using Auto Bracket with [ i.R esolut ion] s et to [ EXTE NDED], it may
take time to record all the set number of pictures.
Auto Bracket is disabled i n the following cases.
[Glistening Water]/[Glittering Illuminations ]/[Soft Image of a Flower] (Scene Guide Mode)
[Miniature Effect]/[Soft Focus]/[Star F ilter] (Creative Control Mode)
When White Balance Bracket is set.
When recording motion pictures
When recording using the flash
When [HDR] is set to [ON]
Item Settings Item Settings
[Single/Burst
Settings]
[] (single) [Sequence] [0/`/_]
[ ] (burst) [`/0/_]
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[3•1] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[5•1] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
[7•1] (7 pictures)
AFSAFS
A