- 199 -
Connecting to other equipment
Note
“PHOTOfunSTUDIO” is not compatible with Mac.
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the PC are communicating, the status indic ator blinks and
the alarm beeps.
Refer to Disconnecting the USB connection cable safely (P200) before disconnecting t he USB
connection cable. Otherwise, data may be destroyed.
Before connecting or disconnecting the AC adaptor (optional), turn the c amera off.
Before inserting or removing a card, turn the camera off and disconnect the USB connection cable.
Otherwise, data may be destroyed.
Copying to a PC without using “PHOTOfunSTUDIO”
If you are not able to install “PHOTOfunSTUDIO”, you can copy files and folders to your PC by
dragging and dropping files from this unit.
The content (folder structure) on the card of this unit is as follows.
AVCHD motion pictures may not be imported correctly when copied as files or folder. We
recommend using “PHOTOfunSTUDIO” on the CD-ROM (supplied) for importing files. Refer to
P197 for details.
A new folder is created when pictures are taken in the following situations.
After [No.Reset] (P76) in the [Setup] menu has been executed
When a card containing a folder with the same folder number has been inserted (such as when
pictures were taken using another maker of camera)
When there is a picture with file number 999 inside the folder
For Windows: A drive ([Removable Disk]) is displayed in [Computer]
For Mac: A drive ([LUMIX], [NO_NAME] or [Untitled]) is displayed on the desktop
Card DCIM: Images
1Folder number
2Color space P: sRGB
_: AdobeRGB
3File number
4JPG: Still pictures
MP4: [MP4] Motion pictures
RW2: Pictures in RAW files
MPO: 3D pictures
MISC: DPOF print
Favorite
AVCHD: [AVCHD] Motion pictures
AVCHDDCIM100_PANA101_PANA999_PANAP1000001.JPGP1000002.JPGP1000999.JPGPRI VATEMISC