- 41 -
Basic
Note
If approximately 1minute elapses without an operation being performed, part of the display will
disappear. Press [DISP.] or touch the LCD monitor to make the display reappear.
About the tilt sensor display
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
1Press [DISP.] to display the tilt sensor.
2Check the tilt of the camera.
AHorizontal direction:
Correcting tilt to the left
BVertical direction:
Correcting downward tilt
When the tilt of the camera is little, the indicator changes to green.
When recording with a vertical orientation, the display automatically switches to a vertically
orientated display.
Note
Even after correcting the tilt, there may still be an error of approximately ± 1°.
When [Fn Button Set] of the [Custom] menu is set to [LevelGauge], you can switch the tilt sensor
display on/off by pressing function button.
When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function (P33) may not work correctly.

 