- 88 -
Recording

Compensating the Exposure

Applicable modes:

Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
The Exposure Compensation value can be set within a range of j5EV to i5EV. When
recording motion pictures, the Exposure Compensation value can be set within a range of
j3EV to i3EV.
Select [0] to return to the original exposure.
Rotate the rear dial to display the [Expo.Meter]. (P166)
Note
To compensate the exposure using the function lever, set [Function Lever] (P163) in the [Custom]
menu to [EXP.].
When the exposure value is out of the j3EV to i3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actual brightness of the
recorded image in the Auto Review or playback screen.
The set exposure value is memorized even if the camera is turned off.
The compensation range of the exposure will be limited depending on the brightness of the subject.
When the aperture and shutter speed values are displayed in the screen in the Program AE Mode,
Program Shift operation and Exposure Compensation operation is switched every time the rear dial
is pressed.
In the Aperture-Priority AE Mode, Aperture Setting operation (P117) and Exposure Compensation
operation is switched every time the rear dial is pressed.
In the Shutter-Priority AE Mode, Shutter Speed Setting operation (P118) and Exposure
Compensation operation is switched every time the rear dial is pressed.
1Press the rear dial to switch to Exposure

Compensation operation.

2Rotate the rear dial to compensate the exposure.
AExposure Compensation value
B[Expo.Meter]
Underexposed Properly
exposed Overexposed
Compensate the exposure
towards positive. Compensate the exposure
towards negative.
16
0
SSSS
F
250 15
4.0 5.6 8.0
3060125
50 50
A B