Basic

[Pixel Refresh]

It will perform optimisation of imaging device and image processing.

Imaging device and image processing is optimized when the camera is purchased. Use this function when bright spots that do not exist in the subject get recorded.

Turn the camera off and on after the pixels are corrected.

[Sensor Cleaning]

Dust reduction to blow off the debris and dust that have affixed to the front of the imaging device is performed.

Dust Reduction Function will operate automatically when the camera is turned on, but you can use this function when you see dust. (P213)

[Format]

The card is formatted.

Formatting permanently deletes all data on your memory card. Please be sure all pictures and motion pictures are saved elsewhere before using this feature.

Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn the camera off during formatting.

If the card has been formatted on a PC or other equipment, format it on the camera again.

If the card cannot be formatted, please try another card before contacting your nearest Service Center.

For USA and Puerto Rico assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

- 77 -

Page 77
Image 77
Panasonic VQT4H13, DMCG5KK, F0612MC0 owner manual Card is formatted, Pixel Refresh, Sensor Cleaning, Format