Panasonic F0612MC0 Sleep Mode, 10MIN./5MIN./2MIN./1MIN./OFF Auto LCD Off, 30MIN./5MIN./2MIN./1MIN

Basic

[Economy]

You can conserve the battery life by setting these menus.

Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery.

[Sleep Mode]:

The camera is automatically turned off if the camera has not been used for the time selected on the setting.

[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]

[Auto LCD Off]:

The LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting.

[30MIN.]/[5MIN.]/[2MIN.]/[1MIN.]

•Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].

•To turn the LCD monitor on again, press any button or touch the LCD monitor.

•Since [Economy] is canceled when the eye sensor auto switching is performed, it is recommended to use this mode with [LVF/LCD Auto] in [Eye Sensor] (P170) set to [OFF].

•[Sleep Mode] does not work in the following cases.

–When using the AC adaptor (optional)

–When connecting to a PC or a printer

–When recording or playing back motion pictures

–During a slide show

[USB Mode]

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied).

y[Select on connection]:

Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

{[PictBridge(PTP)]:

Set after or before connecting to a printer supporting PictBridge.

z[PC]:

Set after or before connecting to a PC.

- 73 -