Clearing a recording paper jam

If the unit does not eject any recording paper during reception or copying, the recording paper has jammed. Remove the jammed paper as shown below.

1

A Open the back lid by lifting up the tabs located

on both sides.

BPress the green lever to release the paper cutter.

2

Pull up the transparent guide and remove the piece

of paper.

If the transparent guide is not pulled up, press the green lever again.

3

Replace the transparent guide and recording paper

roll in the proper direction, and insert the leading

edge of the paper between the recording paper roller and the silver plate.

—Make sure that there is no slack in the paper roll.

4

Close the back lid by gently pressing down on both

ends.

Tab

Back lid

Green lever

Transparent guide

Recording paper roller

Silver plate

52