Adjusting the feeder pressure

No feeding or multiple feeding occurs frequently, adjust the feeder pressure.

1

Open the front lid by pressing the front lid open

 

 

button.

 

 

2

Shift the position of the lever by using an instrument

 

Lever

with a pointed end, like a clip or ball-point pen.

 

 

 

 

Position A: Select this when documents do not feed.

A

C

 

 

B

 

Position B: Standard position (pre-selected)

 

 

 

Position C: Select this when documents

 

 

 

multiple feed.

 

 

3

ends.Close the front lid by gently pressing down on both

 

 

Front lid open button

Removing the handset cradle

To save space or to use the unit mainly for faxes, you may remove the handset cradle.

1

Set the handset switch to NO HANDSET (see

page 43).

2

Pull the hooks to the right in the order as shown,

while lifting up the handset cradle.

3

Disconnect and connect the power cord again.

Caution:

If the handset and handset cradle have been removed when you connect the power cord, an alarm will sound and the following message will be displayed.

CHECK CRADLE

Set the handset switch to NO HANDSET (see page 43).

Hooks

2

1

54