Installing your unit

Installing the handset cradle

If you want to use this unit with a handset, install the handset and handset cradle.

To save space or to use the unit mainly for faxes, you may remove the handset cradle.

Even if the handset and handset cradle are not installed, you can make or answer calls using the SP-PHONE button. When you do not use the handset and handset cradle, see pages 43 and 54.

1 Connect the handset cord.

 

 

Handset cord

 

Handset

 

2

A Open the front lid by pressing the front lid open

 

button.

Tab

 

 

 

B Open the back lid by lifting up the tabs located

 

 

on both sides.

B

 

 

 

A

Front lid open

 

 

button

3

Insert the handset cradle by matching the triangles.

Triangles

 

 

 

Press down on the marked on the handset

4 cradle until it clicks into place.

Make sure the two hooks lock the handset cradle firmly.

5

Place the handset on the handset cradle and close

the lids securely.

If the following message is displayed when the unit is turned on, the handset cradle is not installed correctly.

CHECK CRADLE

Check step 4 again.

Hooks

Triangles

8