2. Preparation
22 For assistance, please visit http://www.panasonic.com/help
2.9 Your fax number
You can program your fax number so that it appears on
the top of each page sent.
1{Menu} i {#}{1}{0}{3} i {Set}
NO.=|
2Enter your fax number, up to 20 digits.
LTo enter a “+”, press {*}.
LTo enter a space, press {#}.
LTo enter a hyphen, press {Flash}.
LTo erase a number, press {Stop}.
3{Set}
4Press {Menu} to exit.
To correct a mistake
Press {<} or {>} to move the cursor to the incorrect
number, and make the correction.
LTo erase all numbers, press and hold {Stop}.
2.10 Configuring the unit to access the LAN (KX-FLM671 only)
You can print documents, scan documents, receive
faxes or send faxes using a computer connected to the
LAN. To enable these features, you need to set the IP
address, subnet mask, and default gateway in the unit.
Important:
LConsult your network administrator when setting
the IP address, subnet mask, and default
gateway.

2.10.1 Setting up automatically with a

DHCP server

Your situation:
– When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server, it
will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.
1After connecting the LAN cable to the unit and the
computer, connect the power cord.
LThe IP address, subnet mask, and default
gateway will be set automatically.
2Install Multi-Function Station on the computer that
you want to use it with. See page 23 for details.
Note:
LYou can connect two or more units and assign IP
addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid unnecessary trouble.

2.10.2 Setting up manually

Your situation:
– When your network administrator does not manage
the network with a DHCP server.
– When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.
1{Menu}
2Press {#}{5}{0}{0} to display “DHCP”.
3Press {0} to select “DISABLED”. i {Set}
4Set each item.
For the IP address:
1. Press {5}{0}{1} to display “IP ADDRESS”.
2. {Set} i Enter the IP address of the unit. i
{Set}
For the subnet mask:
1. Press {5}{0}{2} to display “SUBNET MASK”.
{<}{>}
{Set}
{Menu}

{Stop}

{Flash}