2. Preparation
19
For assistance, please visit http://www.panasonic.com/help
Document Requirements
2.4 Setting the original1Adjust the width of the document guides (1) to fit
the actual size of the document.
2Insert the document (up to 20 pages) FACE DOWN
into the feeder until a single beep is heard and the
unit grasps the document.
Note:
LCheck that any ink, paste or correction fluid has dried
completely.
LRemove clips, staples or other fasteners.
LDo not insert the following types of documents:
(Make a copy of the document and set the copy
instead.)
– Chemically treated paper such as carbon or
carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side that can
be seen through the other side, such as
newsprint
LTo set a document with a width of less than 210 mm
(81/4"), we recommend using a copy machine to copy
the original document onto A4 or letter-size paper,
then setting the copied document.
LDo not set documents that do not satisfy the
requirements of size and weight. Make a copy of the
document using a copy machine and set the copy.
LAvailable document size, document weight and
effective scanning area are as follows:
Minimum document size
Maximum document size
Effective scanning area
LShaded area will be scanned.
Document weight
LSingle sheet:
45 g/m2 to 90 g/m2 (12 lb to 24 lb)
LMultiple sheets:
60 g/m2 to 80 g/m2 (16 lb to 21 lb)
1
128 mm
(5")
128 mm
(5")
600 mm
(235/8")
216 mm
(81/2")
216 mm (81/2")
208 mm (8
3
/
16