2. Preparation
24 For assistance, please visit http://www.panasonic.com/help
2.11.2 Installing Multi-Function Station on a computer
LInstall Multi-Function Station (CD-ROM) before
connecting the unit to a computer with USB
cable. If the unit is connected to a computer with
USB cable before installing Multi-Function
Station, the [Found New Hardware Wizard]
dialog box will appear. Click [Cancel] to close it.
LThe screenshots shown in these instructions are
for Windows XP and are included for reference
only.
LThe screenshots shown in these instructions
may differ slightly from those of the actual
product.
LSoftware features and appearance are sub ject to
change without notice.
LIf you are also using KX-MB200/KX-MB700/KX-
FLB880 series, see page 73.
1Start Windows and exit all other applications.
LFor Windows 2000, Windows XP, Windows Vista
and Windows 7 users, you must be logged in as
an administrator in order to install Multi-Function
Station.
2Insert the supplied CD-ROM into your CD-ROM
drive.
LIf the [Select Language] dialog box appears,
select the language that you want to use with this
software. Click [OK].
LIf the installation does not start automatically:
Click [Start]. Choose [Run...]. Type “D:\Install”
(where “D” is the drive letter of your CD-ROM
drive). Click [OK].
(If you are not sure what the drive letter is for your
CD-ROM drive, use Windows Explorer and look
for the CD-ROM drive.)
3[Easy Installation]
LThe installation will start.
4When the setup program starts, follow the on-screen
instructions.
LReadiris OCR software (page 31) and Device
Monitor (page 62) will also be installed.
5The [Connect Type] dialog box appears.
For USB connection:
1. [Connect directly with a USB cable.] i [Next]
LThe [Connect Device] dialog box will appear.
2. Connect the unit with the USB cable (1), then click
[Next].
* The pictured model is KX-FLM671.
LIf the unit is connected to your computer, the
model name will be automatically detected.
LYou can change the name of the unit if necessary.
3. Click [Install], then follow the on-screen
instructions.
LThe files will be copied to your computer.
For LAN connection (KX-FLM671 only):
1. [Connect via the Network.] i [Next]
LThe [Select a Network Device] dialog box will
appear.
2. Check [Select in the searched list] and select the
unit from the list.
LIf the name of the desired unit is not displayed on
the list, and the IP address for the unit has been
assigned, check [Direct input] and enter the IP
address.
3. [Next]
LYou can change the name of the unit if necessary.
4. Click [Install], then follow the on-screen
instructions.
LThe files will be copied to your computer.
Important notice
If you are using Windows XP, Windows Vista or
Windows 7, a message may appear after connecting
the unit with the USB cable. This is normal and the
software will not cause any difficulties with your
operating system. You can continue the installation
with no problem. This kind of message is displayed:
LFor Windows XP users
“The software you are installing for this hardware
has not passed Windows Logo testing to verify its
compatibility with Windows XP.”
LFor Windows Vista/Windows 7 users
“Would you like to install this device software?”
1