5. Copier

33
5CopierCopy
5.1 Making a copy
1If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2Set the original (page 19).
3If necessary, change the resolution and contrast
according to the type of document.
LTo select the resolution, see page 33.
LTo select the contrast, see page 33.
4If necessary, enter the number of copies (up to 99).
5{Start}
LThe unit will start copying.
6After you finish copying, press {Stop} to reset the
settings you set in step 3 and 4.
Note:
LTo stop copying, see page 62.
LYou can change the default operation mode (feature
#463 on page 51) and the timer before returning to
the default operation mode (feature #464 on page
51).
LIf the {Auto Answer} light is ON, the unit can receive
faxes automatically even when in the copy mode.
To select the resolution
1. Press {Resolution} repeatedly.
–“TEXT/PHOTO”: For both text and photographs.
–“TEXT”: For text only.
–“PHOTO”: For photographs, shaded drawings,
etc.
2. {Set}
Note:
LYou can change the default resolution (feature #461
on page 56).
To select the contrast
You can adjust this setting depending on the darkness or
lightness of the document. 5 levels (light to dark) are
available.
Press {Contrast} repeatedly. i {Set}
Note:
LYou can hold the previous contrast setting (feature
#462 on page 51).

{Copy}

{Stop}

{Start}
{Set}

{Resolution}

{Contrast}

{Auto Answer}