Panasonic KX-FP181E operating instructions FAX only, Tad/Fax

Features Summary

Code	Display & Feature			Settings	How the unit operates
			(KX-FP181)		See page 49 for details.
	FAX PAGER	CALL
			(KX-FP185)	ON
	PAGER CALL
#70
	If you have a pager and wish to
	know when your unit receives an			OFF
	incoming message (KX-FP185
	only) or a fax, activate this feature.
				A
	MELODY RINGER
#71				B
	To set the ring melody
				C
					You can confirm the status of the
	CONNECTING	TONE
					other party’s machine.
				ON
	If you often have trouble when
					● If the ring back tone continues, the
#76	sending a fax, this feature allows				other party’s machine may not be
	you to hear connecting tones; fax				a facsimile or may have run out of
	tone, ring back tone and busy tone.			OFF	paper. Check with the other party.
					● The connecting tone volume
					cannot be adjusted.
	■ For KX-FP181 only			FAX ONLY	“FAX ONLY”: Facsimile only mode
					(p. 41)
#77	AUTO ANSWER
					“TEL/FAX”: Telephone/Facsimile
	To change the receive mode in the
				TEL/FAX	mode (p. 44, 45)
	AUTO ANSWER setting
	■ For KX-FP185 only			TAD/FAX	“TAD/FAX”: Telephone Answering
					Device/Facsimile mode (p. 52)
	AUTO ANSWER
#77				FAX ONLY	“FAX ONLY”: Facsimile only mode
	To change the receive mode in the
					(p. 41)
	AUTO ANSWER setting
				TEL/FAX	“TEL/FAX”: Telephone/Facsimile
					mode (p. 44, 45)
					See pages 44 and 45 for details.
	TEL/FAX RING
				1, 2, 3, 4, 5,
#78	If you use an extension telephone
	in the TEL/FAX mode, select the			6, 7, 8, 9
	desired number of rings of the
	extension telephone.
					1. Follow steps 1–3 on page 70.
	SET DEFAULT
				YES	2. Rotate	EASY DIAL to select
	To reset the advanced features,
#80					“YES”.
	except ECM selection (feature #68				3. Press	SET .
	on page 70) to their default settings			NO	4. Press	SET again.
					5. Press	MENU .

(The default setting is in bold type.)

71