61
Remote Operation
(KX-FP185 only)
■Erasing a specific message
Press while listening to the message you
want to erase.
●Along beep will also sound. The unit will then
play back the next message.
■Erasing all the messages
Press to erase all the messages.
●Along beep will also sound.
■Recording a marker message
You can leave an additional message.
1. Wait for the voice guide.
2. Wait about 10 seconds.
3. Leave a message after the beep.
■Re-recording a greeting message
You can change the contents of the TAD/FAX
greeting message.
1. Press to start recording.
●Along beep will sound.
2. Speak clearly up to 16 seconds.
●If you pause for over 2 seconds, 6 beeps
will sound and the recording will stop.
Repeat from step 1 within 10 seconds.
3. When finished recording, press .
●The new greeting message will be played.
■Skipping the greeting message
Press during the greeting message playback.
●The unit will skip the rest of the greeting
message.
0
9
7
5
4
Please leave your name and
message after the beep.
■
Turning the message transfer on or off
You must pre-program a transfer telephone
number beforehand (feature #60 on page 70).
Press to turn ON the message transfer.
Press to turn OFF the message transfer.
●If a transfer telephone number is not
programmed, you cannot turn this feature ON.
■Turning the pager call on or off
You must program a pager number beforehand
(feature #70 on page 49).
Press to turn ON the pager call.
Press to turn OFF the pager call.
●If a pager number is not programmed, you
cannot turn this feature ON.
■Changing the receive mode
Press to change the receive mode from
TAD/FAX to TEL.
●You cannot return to the TAD/FAX mode in the
same call. To return to the TAD/FAX mode, see
page 46.
8 0
8 4
8 3
8 2
8 1