Panasonic KX-FP215 Advanced features, Programmable Features, 1 “ON”, MENU i#25, 1 “A”, 2 “B”

8. Programmable Features

8.3 Advanced features

Feature	Feature code	Selection
Setting the journal	{#}{2}{2}	{0} “OFF”: The unit will not print a journal report, but will keep a
report to print		record of the last 30 fax transmissions and receptions.
automatically		{1} “ON” (default): The unit will print a journal report automatically
		after every 30 new fax transmissions and receptions (page 23).
Sending documents	{#}{2}{3}	If you cannot send a fax overseas even if the number is correct
overseas		and the line is connected, activate this feature before sending the
		fax.
		This feature improves the reliability by reducing the transmission
		speed.
		{0} “OFF”: Deactivates this feature.
		{1} “NEXT FAX”: This setting is effective only for the next
		attempted fax transmission. After transmission, the unit will return
		to the previous setting.
		{2} “ERROR” (default): When the previous fax transmission fails
		and you wish to re-send the document.
		Note:
		L Calling charges may be higher than usual.
Sending a fax at a	{#}{2}{5}	This feature allows you to take advantage of low-cost calling
specified time		hours offered by your telephone company. This feature can be set
		up to 24 hours in advance of the desired time.
		{0} “OFF” (default)
		{1} “ON”
		To send a document:
		1. Insert the document.
		2. If necessary, press {A} or {B} repeatedly to select the
		desired resolution (page 23).
		3. {MENU} i{#}{2}{5}
		4. Press {1} to select “ON”. i{SET}
		5. Enter the fax number. i{SET}
		6. Enter the transmission start time.
		L Press {*} repeatedly to select “AM” or “PM”.
		7. {SET} i{MENU}
		Note:
		L To cancel after programming, press {STOP} then {SET}.
Setting the Caller ID list	{#}{2}{6}	{0} “OFF” (default): The Caller ID list will not be printed
to print automatically		automatically, but the unit will keep a record of the information for
		the last 30 different callers.
		{1} “ON”: The Caller ID list will be printed automatically each time
		the unit logs 30 different callers (page 20).
Activating the	{#}{3}{1}	{0} “OFF” (default)
Distinctive Ring feature		{1} “ON”
		See page 30 for details.
Setting the ring pattern	{#}{3}{2}	{1} “A”
for fax (Distinctive Ring		{2} “B”
feature)		{3} “C”
		{4} “D”
		{5} “B-D”(default)
		See page 30 for details.

38