1. Introduction and Installation
1.6 Paper tray
Insert the tabs (1) on the paper tray (2) into the slots on the back of the unit (3).
2
1
3
1.8 Recording paper
The unit can hold up to 50 sheets of 75 g/m2 paper. See the note for paper specifications (page 51).
1Before inserting a stack of paper, fan the paper to prevent paper jams.
2Pull the tension plate forward (1) and hold open while inserting the paper.
Side to be printed face down.
2
1.7Recording paper support
Insert the recording paper support (1) into the slot to the right of the recording paper exit (2), then into the left slot (3).
3 1
2
Recording paper entrance
1
LThe paper should not be over the tab (2).
LIf the paper is not inserted correctly, readjust the paper, or the paper may jam.
Correct |
| Incorrect |
|
|
|
LThe recording paper will be ejected from the top of the unit after printing. The recording paper support prevents the printed paper from curling.
13