7. Programmable Features
Code #06: Changing the ring setting in FAX ONLY mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a call in FAX ONLY mode.
You can select “2” (default), “3”, “4”, “5”, “6”, “7”, “8” or “9”.
Code #12: Securing the remote operation for the answering machine
REMOTE TAM ACT.
=OFF [±]
If you are using the unit with an answering machine, activate this feature, and program the remote activation ID to secure the remote operation for the answering machine.
1.Press {MENU}.
2.Press {#} then {1}{2}.
3.Press {A} or {B} to select “ON”.
4.Press {SET}.
5.Enter your ID from 1 to
L The default ID is “11”.
6.Press {SET}.
7.Press {MENU}.
Code #13: Setting the dialling mode
DIALLING MODE
=TONE [±]
If you cannot dial, change this setting depending on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Code #17: Setting the ringer pattern
RINGER PATTERN
=A[±]
You can select “A” (default), “B” or “C”.
7.3 Advanced features
Code #22: Setting the journal report to print automatically
AUTO JOURNAL
=ON[±]
“ON” (default): The unit will print a journal report automatically after every 30 new fax communications (page 25).
“OFF”: The unit will not print a journal report, but will keep a record of the last 30 fax communications.
Code #23: Sending documents overseas
OVERSEAS MODE
=OFF [±]
If you have difficulty sending an overseas fax, activate this feature before starting transmission.
LThis feature is not available for broadcast
transmission.
LThe calling charge may be higher as the transmission speed is slowed down.
“ON”: After transmission, this feature will turn off automatically.
“OFF” (default): Deactivates this feature.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF [±]
This feature allows you to take advantage of low- cost calling hours offered by your telephone company. This feature can be set up to 24 hours in advance of the desired time.
To send a document:
1.Insert the document.
2.Press {MENU}.
3.Press {#} then {2}{5}.
4.Press {A} or {B} repeatedly to select “ON”.
5.Press {SET}.
6.Enter the fax number.
7.Press {SET}.
8.Enter the transmission start time.
LPress {*} to select “AM” or “PM”.
9.Press {SET}.
10.Press {MENU}.
Note:
LTo cancel after programming, press {STOP} then {SET}.
Code #26: Setting the Caller ID list to print automatically
AUTO CALL. LIST
=ON[±]
“ON” (default): The unit will print the Caller ID list automatically after every 30 new calls (page 22). “OFF”: The unit will not print the Caller ID list, but keep records of the last 30 caller information.
37
