8. Help
LThere is no space to store new entries in navigator directory. Erase unnecessary entries (page 21).
FAX IN MEMORY
LThe unit has a document in memory. See the other displayed message instructions to print out the document.
FAX MEMORY FULL
LThe memory is full of received documents
due to a lack of recording paper or a recording paper jam. Install paper (page 13) or clear the jammed paper (page 44).
LWhen performing memory transmission, the document being stored exceeded the memory capacity of the unit. Transmit the entire document manually.
FILM EMPTY
LThe film is empty. Replace the film with a new
one (page 12).
LThe ink film is slack. Tighten it (page 11) and install again.
LThe fax machine is positioned near appliances such as TVs or speakers which generate an intense magnetic field.
FILM NEAR EMPTY
LThe remaining film is low. Prepare a new film (page 9).
MEMORY FULL
LWhen making a copy, the document being stored exceeded the memory capacity of the unit. Press {STOP} to clear the message. Divide the document into sections.
MODEM ERROR
LThere is something wrong with the modem circuit. Contact our service personnel.
NO FAX REPLY
LThe other party’s fax machine is busy or has run out of recording paper. Try again.
OPEN CABINET
CHECK FILM SLACK
b
OPEN CABINET
CHECK FILM TYPE
LThe ink film is empty. Replace the ink film with a new one (page 12).
LThe ink film is not installed. Install it (page 11).
LThe ink film is slack. Tighten it (page 11). L The fax machine is positioned near
appliances such as TVs or speakers which generate an intense magnetic field.
PAPER JAMMED
LA recording paper jam occurred. Clear the jammed paper (page 44).
PLEASE WAIT
LThe unit is checking that there is no slack or crease on the ink film. Wait for a moment while the check is completed.
POLLING ERROR
LThe other party’s fax machine does not offer the polling function. Check with the other party.
REDIAL TIME OUT
LThe other party’s fax machine is busy or has run out of recording paper. Try again.
REMOVE DOCUMENT
LThe document is jammed. Remove the jammed document (page 46).
TRANSMIT ERROR
LA transmission error occurred. Try again.
UNIT OVERHEATED
LThe unit is too hot. Let the unit cool down.
8.3When a function does not work, check here
8.3.1 General
I cannot make and receive calls.
LThe power cord or telephone line cord is not connected. Check the connections.
LIf you used a splitter to connect the unit, remove the splitter and connect the unit to the wall jack directly. If the unit operates properly, check the splitter.
41
