Panasonic KX-TG5230AL Registration, Press and hold LOCATOR/INTERCOM/TRANSFER for 3 seconds

TG5230AL.fm Page 64 Friday, June 11, 2004 5:31 PM

Cancelling Registration/Re-registration

Re-registering the Handset Handset & Base Unit

If you want to re-register the handset to the base unit or a different base unit of the same model, you need to register it to that base unit. The handset will be given a new extension number of that base unit. Only one handset can be registered at a time near the base unit.

Make sure the base unit and the other handsets are not being used. Have both the handset and base unit nearby during registration.

If you have cancelled handset registration at a previous base unit (p. 63), start from step 5.

1	Handset: Press [MENU].
2	Handset: Scroll to “Initial setting” by
				Initial setting
	pressing [d] or [B], then press the soft key
	(	SELECT	).

3Handset: Scroll to “Registration” by pressing [d] or [B], then press the soft key ( SELECT ).

Registration

4 Handset: Press the soft key ( SELECT ) at “HS	HS registration
registration”.

5Base unit:

Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.

•The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute.

6Handset:

(1)Press the soft key ( O K ).

(2)Wait until a long beep sounds and the display shows the new extension number (ex. extension number 2).

• Registration is complete.

Press LOCATOR on base unit for 3 sec.

Then press OKL

BACK PORTUG O K

IN USE SPIPRIVACY1[2]

Handset [2] Registered

•You can stop registration by pressing [OFF] on the handset and pressing [LOCATOR/INTERCOM/TRANSFER] on the base unit.

64