Panasonic KX-TG5230AL Voice Enhancer Technology, Clarity Booster, During a conversation

TG5230AL.fm Page 24 Friday, June 11, 2004 5:31 PM

Making Calls

Voice Enhancer Technology

Panasonic’s Voice Enhancer Technology can simulate a band signal above the normal bandwidth limitations, achieving a sound which is close to the actual voice. You can turn this feature on or off, depending on the circumstance. The factory preset is OFF.

•Depending on the condition and quality of your telephone line, this feature may emphasize existing line noise. If it becomes difficult to hear, turn this feature off.

To turn this feature on, press the soft key (

)

( V E )

IN USE

I

1[1]

during a conversation.

Talk

• “

” is displayed.

00-00-32

VE

• To turn this feature off, press the soft key (

)

( V E )

again. “

” disappears from the display.

(VE)

PRIVACY

MUTE

VE

•After hanging up a call, the on/off setting will be retained.

When the handset is not in use, you can also turn this feature on or off by programming as follows:

1.Press [MENU].

2.Scroll to “Voice enhancer” by pressing [d] or [B], then press the soft key ( SELECT ).

3.Select “On” or “Off” by pressing [d] or [B].

4.Press the soft key ( SAVE ), then press [OFF].

Clarity Booster

This feature can improve sound clarity when the handset is used in an area where there may be interference. During an outside call, this feature will be turned on automatically when necessary. This feature will turn off when you hang up, put a call on hold, or make a conference call. It will not turn off automatically during a call. You can also turn this feature on or off manually.

1.Press [MENU] during an outside call.

2.Press [2] to select “2=Booster on” or “2=Booster off”.

1=Phone book 2=Booster on

•You can also select “2=Booster on” or “2=Booster off” by pressing [d] then pressing the soft key ( SELECT ).

•While this feature is turned on, “Booster on” will flash during a conversation.

•If this feature is turned off manually during a call, it will not be turned on automatically during the same call.

•When this feature is turned on automatically or manually, battery operating time may be shortened (p. 13).

•The maximum number of extensions which can be used at a time may decrease when using this feature.

Backlit LCD display/Lighted handset keypad

The handset display and dialling buttons will light for a few seconds after pressing a button or lifting the handset off the base unit (or the charger, for accessory handset users, p. 3). They will also light when an intercom/outside call is being received.

24