Panasonic KX-TG5230AL operating instructions Installation, Connections

TG5230AL.fm Page 11 Friday, June 11, 2004 5:31 PM

Installation

Connections

Raise the antennas.

Fasten the AC adaptor cord.

Hook

Bottom of the base unit

To Socket

Preparation

Telephone		Telephone
		Plug
Line Cord	*Noise Filter

(For ADSL users)

To Power Outlet

(AC 230 V 240 V, 50 Hz)

AC Adaptor

•USE ONLY WITH Panasonic AC ADAPTOR PQLV1AL.

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

•If your unit is connected to a PBX which does not support Caller ID services, you cannot access those services.

•This unit will not function during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using a telephone double adaptor.

•KX-TG5230AL is not designed to be used with rotary (pulse dialling) service.

*If the unit is connected to a telephone line with ADSL service, you may hear noise from the receiver or speaker during conversations or the unit may not display caller’s phone number properly. We recommend connecting a noise filter (contact your ADSL service provider) to the telephone line between the base unit and the telephone line jack.

11