Panasonic KX-TG5230AL Making Calls Using the Base Unit Base Unit, To adjust the speaker volume

TG5230AL.fm Page 25 Friday, June 11, 2004 5:31 PM

Making Calls

Using the Base Unit Base Unit

1Press [SP-PHONE].

•The indicator lights.

2Dial a phone number.

•If you misdial, press [SP-PHONE]and start again from step 1.

3When the other party answers, talk into the MIC (microphone).

4To hang up, press [SP-PHONE].

•The indicator light goes out.

[REDIAL/PAUSE] [B], [d]

	MIC
IN USE
Indicator

[HOLD]

[SP-PHONE]

and Indicator

Basic

•To switch to the handset while using the base unit speakerphone:

—If the handset is off the base unit, press [C] or [s] on the handset, then press [SP-PHONE]on the base unit.

—If the handset is on the base unit, just lift up.

Hands-free Digital Duplex Speakerphone

For best performance, please note the following:

•Talk alternately with the other party in a quiet room.

•If you or the other party has difficulty hearing, press [d] to decrease the speaker volume.

To adjust the speaker volume

To increase volume, press [B]. To decrease volume, press [d].

•There are 8 volume levels. If you try to increase/decrease volume when it is at the maximum/minimum level, the base unit beeps 3 times.

To redial the last number dialled

Press [SP-PHONE], then press [REDIAL/PAUSE].

To put a call on hold

Press [HOLD] during a conversation.

•The SP-PHONE indicator and IN USE indicator flash.

Operation

To return to the call, press [SP-PHONE].

•The handset users can also take the call by pressing [C] or [s].

•If another phone is connected on the same line (p. 11), you can also take the call by lifting its handset.

•If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold the call will be disconnected.

25