Panasonic KX-TG5230AL Busy, Invalid, Cancelling Registration/Re-registration

TG5230AL.fm Page 65 Friday, June 11, 2004 5:31 PM

Cancelling Registration/Re-registration

If you have not cancelled the handset’s registration at the previous base unit (p. 63), the handset number remains in that base unit’s memory. To erase the handset number from the previous base unit, see the base unit’s Operating Instructions. For the KX-TG5230AL base unit: (1) Press and hold [LOCATOR/ INTERCOM/TRANSFER] for 3 seconds, and (2) Press and hold the handset number [1] ( ) to [4] () that you do not want for 5 seconds. A long beep sounds, then the handset number is erased.

If the Following Appear on Your Display...

The following will be displayed when the unit needs your attention.

Display message		Cause & Remedy
Recharge battery	• The battery needs to be charged. Recharge the
	battery (p. 13).
Charge for 6 HRS	• The battery has been discharged. The handset will
	not work. Fully charge the battery (p. 12).
No link to base.	• The handset has lost communication with the base
Move closer to	unit. Walk closer to the base unit, and try again.
base and try	• Confirm the base unit’s AC adaptor is plugged in.
again.	• Raise the base unit antennas.
	• The handset’s registration may have been cancelled.
	Re-register the handset (p. 64).
Please lift up	• A handset button was pressed while the handset was
	on the base unit (or the charger, for accessory
and try again.	handset users, p. 3). Lift the handset and press the
	button again.
Busy	• The called base unit or handset is in use.
	• Privacy mode is on for the call you tried to join
	(p. 51).
	• The handset you tried to send phone book items to is
	in use.
	• The handset you are calling is too far from the base
	unit.
Invalid	• The called handset has not been registered to the
	base unit.
	• You selected your own extension number.
	65

Telephone System Answering System Useful Information