Panasonic KX-TG5230AL operating instructions Denied, If the Following Appear on Your Display

TG5230AL.fm Page 66 Friday, June 11, 2004 5:31 PM

If the Following Appear on Your Display...

Display message				Cause & Remedy
	• When you tried to register or deregister the handset,
Error!!	the handset and base unit could not link for some
	reason, such as interference from electrical
	appliances. Move the handset and base unit away
	from any electrical appliances and try again.
	• If more than one handset is in use, you may not be
	able to register/deregister. Try again later.
	• Another handset tried to send phone book items to
	you but copying stopped. Have the other handset
	user re-send the items to you (p. 39, 40).
System is busy.	• If more than one other user is using the handset and/
Please try again	or base unit, such as conducting outside/intercom
later.	calls, you may not be able to use the handset. Try
	again later.
	• The handset has lost communication with the base
	unit. Walk closer to the base unit and try again.
Phone book full	• When you tried to store an item in the phone book,
	the phone book memory was full. Press [OFF] to exit
	programming mode. To erase other items from the
	phone book, see page 38.
---Incomplete---	• When the displayed item was sent to the destination
Tom Jones	handset, the phone book memory was full and
0987654321	copying stopped. If you tried to send all of the items,
Phone book full	the item displayed with “Incomplete” and items
(The name/number is
an example.)	after it have not been copied to the destination
	handset. Press [OFF] to exit (p. 39, 40). To erase
	items from the destination handset phone book, see
	page 38. You can copy all of the items again or copy
	the items which have not been copied one by one
	(p. 39, 40).
---Incomplete---	• The destination handset is out of area.
Tom Jones	• The destination handset user may have pressed
0555654321	C	] or [	s	].
(The name/number is	[
an example.)
Phone book	• Your phone book is empty. No items were copied to
	the destination unit.
No items stored
Denied	• The Room Monitor feature is turned off on the
	destination handset or base unit and cannot be
	monitored (p. 49).
	• The called handset was on the base unit. The
	handset must be off the base unit to be monitored.

66