Panasonic KX-TG5230AL operating instructions Troubleshooting

TG5230AL.fm Page 69 Friday, June 11, 2004 5:31 PM

Troubleshooting

Problem	Cause & Remedy
You cannot program any	• Programming is not possible while the handset
function items.	and/or base unit is being used.
	• Do not pause for over 60 seconds while
	programming.
	• Walk closer to the base unit.
	• When the dial lock is turned on, you cannot
	store phone numbers (p. 34, 41). To turn the
	mode off, see page 56.
While programming or	• A call is coming in. To answer the call, press
searching, the handset or base	[C], [s] or [SP-PHONE]. Start again from the
unit starts to ring and the	beginning after hanging up.
program/search stops.

You cannot make an intercom/ • If more than one other user is using the

outside call.handset and/or base unit, you may not be able to make a call. Try again later.

•The handset you called is too far from the base unit.

•You cannot make an outside call when the dial lock is turned on. To turn the mode off, see page 56.

•Set the dialling mode to “Tone” (p. 21).

Telephone System

You cannot redial.• If the last number dialled was more than 48 digits long, the number will not be redialled correctly.

•The [REDIAL/PAUSE] button on the base unit functions as either redial or pause. It will redial the last number dialled if pressed before dialling any digits (p. 25). If another number has been dialled first, it will operate as a pause button (p. 51).

•You cannot redial when the dial lock is turned on. To turn the mode off, see page 56.

69

Answering System Useful Information