Programming
18(middle soft key)
2{V}/{^}: “Base Unit Setup” i
M
3{V}/{^}: “Base Unit PIN” i
M
4Enter the current
5Enter the new
Incoming call barring (Caller ID subscribers only)
Available for:
This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call.
Important:
L When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list (page 25) with 7after the call is disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call barred list by using the caller list or by entering the numbers directly.
Important:
L You must store the phone number with an area code in the call barred list.
■From the caller list:
18(middle soft key)
2{V}/{^}: “Caller List” i
M
3{V}/{^}: Select the entry to be barred. i 8
4{V}/{^}: “Add Bar List” i
M
5{ih}
■By entering phone numbers:
18(middle soft key)
2{V}/{^}: “Caller Barred” i Mi ~
3Enter the phone number (24 digits max.). i M
L To erase a digit, press ^.
4{ih}
Viewing/editing/erasing bar call numbers
18(middle soft key)
2{V}/{^}: “Caller Barred” i
M
3{V}/{^}: Select the desired entry. L To exit, press {ih}.
4Proceed with the desired operation.
■Editing a number:
8i {V}/{^}: “Edit” i MiPress {^} or {V} to move the cursor. i Edit the number.
iMi {ih}
■Erasing a number:
8i {V}/{^}: “Erase” i
Mi{V}/{^}: “Yes” i M
i{ih}
Note:
L When editing, press the desired dial key to add, ^to erase.
22
