Useful Information
Problem | Cause/solution |
I do not know how to erase y | L There are unviewed missed calls remaining. |
(Missed call) from the display. | View them and erase yin the following way. |
| 1 8(middle soft key) |
| 2 {V}/{^}: “Caller List” i M |
| 3 Press {V} to search from the most recent |
| call, or press {^} to search from the oldest |
| call. |
|
|
Programmable settings |
|
|
|
Problem | Cause/solution |
I have changed the display | L Change the display language (page 13). |
language to a language I |
|
cannot read. |
|
While programming, the | L A call is being received. Answer the call and |
handset starts to ring. | start again after hanging up. |
While programming, the | L A call matching an entry in the call barred list |
display returns to standby | is being received.*1 Wait and try again later. |
mode. |
|
I cannot register a handset to a | L You entered the wrong PIN. If you forget your |
base unit. | PIN, contact your nearest Panasonic service |
| centre. |
| L Place the handset and the base unit away |
| from other electrical appliances. |
*1 |
|
|
|
Battery recharge |
|
|
|
Problem | Cause/solution |
The handset beeps and/or ) | L Battery charge is low. Fully charge the |
flashes. | batteries (page 8). |
I fully charged the batteries, but | L Clean the charge contacts and charge again |
)still flashes. | (page 9). |
| L It is time to replace the batteries (page 8). |
I fully charged the batteries, but | L Clean the battery ends (S, T) and the |
the operating time seems to be | charge contacts with a dry cloth and charge |
shorter. | again. |
The handset display is blank. | L The handset is not turned on. Turn the power |
| on (page 12). |
40
