Programming
Special programming
Alarm
You can set one of 2 different alarm options (once or daily) at a time for each handset. An alarm sounds at the set time for 3 minutes.
Important:
L Set the date and time beforehand (page 13).
18(middle soft key)
2{V}/{^}: “Handset Setup” i
M
3{V}/{^}: “Time Settings” i
M
4{V}/{^}: “Alarm” i M
5{V}/{^}: Select the desired alarm option. i M
“Off”
Turns alarm off. Press Magain, then press {ih} to exit.
“Once”
An alarm sounds once at the set time. Enter the desired date and month. i M
L If you select Arabic as the display language, enter the desired month and date.
“Daily”
An alarm sounds daily at the set time.
6Set the desired time. i M
7{V}/{^}: Select the desired alarm tone. i M2 times
L We recommend selecting a different ringer tone to the one used for outside calls.
8{ih}
L When the alarm is set, Eis displayed.
Note:
L You can skip to step 4 by pressing {R/E} in standby mode.
L To stop the alarm, press any dial key or place the handset on the base unit or charger.
LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
LIf you select “Once”, the setting changes to “Off” after the alarm sounds.
Selecting area codes to be deleted automatically
In some situations, phone numbers stored automatically in the caller list (page 25) will include area codes. If you do not want to dial the area codes when making calls from the caller list, you can store the area codes which you want the unit to delete automatically.
Example: You have stored the area code “123”. If you make a call from the caller list to the phone number
18(middle soft key)
2{V}/{^}: “Base Unit Setup” i
M
3{V}/{^}: “Area Code” i M
4Enter an area code (5 digits max.). i Mi {ih}
Changing the base unit PIN (Personal Identification Number)
Important:
L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, contact your nearest Panasonic service centre.
21
