| Useful Information |
|
|
Making/answering calls, intercom | |
|
|
Problem | Cause/solution |
w is flashing. | L The handset is too far from the base unit. |
| Move closer. |
| L The base unit’s AC adaptor is not properly |
| connected. Reconnect AC adaptor to the |
| base unit. |
| L You are using the handset or base unit in an |
| area with high electrical interference. Re- |
| position the base unit and use the handset |
| away from sources of interference. |
| L The handset is not registered to the base unit. |
| Register it (page 23). |
Noise is heard, sound cuts in | L You are using the handset or base unit in an |
and out. | area with high electrical interference. Re- |
| position the base unit and use the handset |
| away from sources of interference. |
| L Move closer to the base unit. |
| L If you use a DSL/ADSL service, we |
| recommend connecting a DSL/ADSL filter |
| between the base unit and the telephone line |
| jack. Contact your DSL/ADSL provider for |
| details. |
The handset does not ring. | L The ringer volume is turned off. Adjust ringer |
| volume (page 19). |
The base unit does not ring.*1 | L The ringer volume is turned off. Adjust ringer |
| volume (page 20). |
I cannot make a call. | L The dialling mode may be set incorrectly. |
| Change the setting (page 13). |
| L The handset is too far from the base unit. |
| Move closer and try again. |
| L Another unit is in use. Wait and try again later. |
| L Answering system is being used.*1 Wait and |
| try again later. |
| L The key lock feature is turned on. Turn it off |
| (page 16). |
*1 |
|
41
