Programming
| Page | ||
Base Unit Setup*1 | Ringer Volume*8 | – | – |
> | <Medium> |
|
|
| Dial Mode | – | 13 |
| <Tone> |
|
|
| Privacy Mode*9 | – | – |
| <Off> |
|
|
| Recall/Flash*10 | – | 15 |
| <600 msec.> |
|
|
| Area Code | – | 21 |
| Base Unit PIN | – | 21 |
| <0000> |
|
|
| Repeater | – | 24 |
| <Off> |
|
|
Caller Barred*1, *8 | – | – | 22 |
7 |
|
|
|
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*3 When the ringer volume is turned off, ~is displayed and the handset does not ring for outside calls.
However even when the ringer volume is set to off, the handset rings:
–at the low level for alarm (page 21) and intercom calls (page 34)
–at the high level for paging (page 34)
*4 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*6 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*8
*9 To prevent other users from joining your conversations with outside callers, turn this feature on.
*10 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
20
