Preparation

Connecting the telephone line cord

Refer to one of the following methods depending on your situation:

To connect to a 2-line telephone jack: page 13

To connect to 2 single-line telephone jacks: page 13

If you use the unit as a single-line telephone only: page 13

Connect the telephone line cord until it clicks into the base unit and telephone line jack.

To connect to a 2-line telephone jack

GREEN” plug

4-wire cord

To 2-line telephone jack (RJ14C)

To connect to 2 single-line telephone jacks

 

To single-line

“Transparent” plug

telephone jacks (RJ11C)

2-wire cord

 

 

Line 1

GREEN” plug

4-wire cord

 

 

Line 2

If you use the unit as a single-line telephone only

Be sure to connect the telephone line cord to LINE 1/2 to allow usage of the unit during a power failure (page 12). Change the line selection mode from Autoto Line1(page 17).

“Transparent” plug

2-wire cord

To single-line telephone jack (RJ11C)

Note:

L Check tel line 2is displayed on the unit. To erase it, see page 47.

For assistance, please visit http://www.panasonic.com/help

13

Page 13
Image 13
Panasonic KX-TG9392, KX-TG9391T Connecting the telephone line cord, To connect to a 2-line telephone jack, Wire cord