Caller ID Service
–if an arrow (>) is displayed after the number, the whole phone number is not shown. Proceed with the operation for your unit.
Base unit:
Press {8} to see the remaining numbers. To return to the previous display, press {7}.
Handset:
Press {>} to see the remaining numbers. To return to the previous display, press {<}.
LIn step 3, the unit automatically uses the line you set in line selection mode (page 17) to call back. When the line selection mode is set to “Auto”, the indicated line (cor d) is used for the call. If the indicated line is already being used or you want to select the other line:
Base unit: Press {LINE 1} or {LINE 2}, then lift the corded handset.
Handset: Press {CALL}, then press {LINE 1} or {LINE 2}.
Editing a caller’s phone number before calling back
You can edit a phone number in the caller list by removing its area code and/or the long distance code “1”.
:Base unit / YHandset
1Proceed with the operation for your unit. Base unit: {CID}
Handset: {MENU} i{#}{2}{1}{3}
2{V}/{^}: Select the desired entry.
3Proceed with the operation for your unit. Base unit: {EDIT}
Handset: {CALL}
4Press {EDIT} repeatedly until the phone number is shown in the desired format.
1Local phone number
Example:
321-5555
2Area code – Local phone number
Example:
31 – Area code – Local phone number
Example:
5Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C}
L If the indicated line is already being used or you want to select the other line:
Base unit: Press {LINE 1} or {LINE 2}, then lift the corded handset.
Handset: Press {LINE 1} or {LINE 2}.
Caller ID number auto edit feature
Once you call back an edited number, the unit remembers the Area Code and Format of the Edited Number. Next time when someone calls from the same Area Code, caller information is customized by the unit as follows:
–When the call is being received, the Caller ID number is displayed in the same Format as the Edited Number.
–After the call is ended, the phone number of the caller, when reviewed from the Caller list, is displayed in the same Format as the Edited Number.
For example, you can use this feature to set the unit to ignore the area code of callers in your area code, so that you can call these local numbers using caller information without dialing the area code.
To activate this feature, you must edit an item in the caller list, then call that number. After that, phone numbers from that caller’s area code are edited automatically.
This feature can be turned on or off (page 28).
Note:
LPhone numbers from the 4 most recently edited area codes are automatically edited.
L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again.
Erasing selected caller information
:Base unit / YHandset
1Proceed with the operation for your unit. Base unit: {CID}
Handset: {MENU} i{#}{2}{1}{3}
2{V}/{^}: Select the desired entry.
3{ERASE}
34 | For assistance, please visit http://www.panasonic.com/help |
