Preparation

L If you want to use the handset immediately, charge the batteries for at least 15 minutes.

L Clean the charge contacts of the handset and charger with a soft and dry cloth once a month. Clean more often if the unit is exposed to grease, dust, or high humidity.

Battery level

Battery icon

Battery level

1High

2Medium

3Low

L When flashing: Needs to be charged.

4Empty

Note:

L The batteries need to be charged if the handset beeps while you are engaged in a call or operating the answering system remotely.

Panasonic Ni-MH battery performance (supplied batteries)

Operation

Operating time

In continuous use

12 hours max.

Not in use (standby)

6 days max.

Note:

L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).

L Even after the handset is fully charged, the handset can be left on the charger without any ill effect on the batteries.

LThe battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the charger and let it charge for at least 7 hours.

Setting up the unit before use

Display language

You can select either Englishor Españolas the display language. The default setting is English.

:Base unit / YHandset

1{MENU} i{#}{1}{1}{0}

2{V}/{^}: Select the desired setting.

3Press the middle soft key to save.

4Proceed with the operation for your unit. Base unit: {■} (EXIT)

Handset: {OFF}

Voice guidance language

You can select either Englishor Españolas the voice guidance language of the answering system. The default setting is English.

Program this setting using either the base unit or one of the handsets.

:Base unit / YHandset

1{MENU} i{#}{1}{1}{2}

2{V}/{^}: Select the desired setting.

3{SAVE}

4Proceed with the operation for your unit. Base unit: {■} (EXIT)

Handset: {OFF}

Dialing mode

If you cannot make calls, change this setting according to your telephone line service. The default setting is Tone.

Tone: For tone dial service.

Pulse: For rotary/pulse dial service.

Program this setting using either the base unit or one of the handsets.

:Base unit / YHandset

1{MENU} i{#}{1}{2}{0}

2{V}/{^}: Select the desired setting.

3{SAVE}

16

For assistance, please visit http://www.panasonic.com/help

Page 16
Image 16
Panasonic KX-TG9391T, KX-TG9392 Setting up the unit before use, Display language, Voice guidance language, Dialing mode