Programming
32 For assistance, please visit http://www.panasonic.com/help
2Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Registering a unit
Operating additional handsets
Additional handsets
Up to 6 handsets can be registered to the base
unit.
Important:
LSee page 5 for information on the available
model.
Registering a handset to the base
unit
The supplied handset and base unit are pre-
registered. If for some reason the handset is not
registered to the base unit, register the handset.
1Handset:
{MENU} i {#}{1}{3}{0}
2Base unit:
Press and hold {LOCATOR} for 5 seconds
until the registration tone sounds.
LIf all registered handsets start ringing, press
the same button to stop. Then repeat this
step.
LThe next step should be completed within
90 seconds.
3Handset:
Press {OK}, then wait until a long beep
sounds.
Note:
LWhen you purchase an additional handset, refer
to the additional handset’s installation manual
for registration.
Deregistering a handset
A handset can cancel its own registration (or the
registration of another handset) that is stored in the
base unit. This allows the handset to end its
wireless connection with the system.
1{MENU} i {#}{1}{3}{1}
2{3}{3}{5} i {OK}
3Select the handset you want to cancel by
pressing the desired handset(s) number.
LThe selected handset number(s) flashes.
LTo cancel a selected handset number,
press the number again. The number will
stop flashing.
4{OK} i {V}/{^}: “Yes” i {SELECT}
LWhen you cancel a different handset than
the one you are now using, press {OFF} to
exit.
Y Handset
TG9391.book Page 32 Tuesday, July 8, 2008 8:01 AM