Preparation
4Proceed with the operation for your unit. Base unit: {■} (EXIT)
Handset: {OFF}
Date and time
Program this setting using either the base unit or one of the handsets.
:Base unit / YHandset
1{MENU} i{#}{1}{0}{1}
2Enter the current month, date, and year by selecting 2 digits for each.
Example: September 15, 2008
{0}{9} {1}{5} {0}{8}
3Enter the current hour and minute
{0}{9} {3}{0}
4Press {*} to select “AM” or “PM”.
5{SAVE}
6Proceed with the operation for your unit. Base unit: {■} (EXIT)
Handset: {OFF}
Note:
L When English is selected as the display language,
L To correct a digit:
Base unit: Press {^}, {V}, {7}, or {8} to move the cursor to the digit, then make the correction.
Handset: Press {^}, {V}, {<}, or {>} to move the cursor to the digit, then make the correction.
L The date and time may be incorrect after a power failure. In this case, set the date and time again.
Line selection mode
The line selection mode determines which line is selected when:
–you lift the corded handset
–you press
–you press {C}/{s} on the handset (when making/answering calls)
The following setting is available:
–“Auto” (default): When making a call, line 1 is selected. If that line is unavailable, line 2 is selected. When you call back using the caller list (page 33) or while listening to a message (page 37, 38), the indicated line is used. When answering a call, the ringing line is selected.
–“Line1”: Line 1 is selected.
–“Line2”: Line 2 is selected.
:Base unit / YHandset
1{MENU} i{#}{2}{5}{0}
2{V}/{^}: Select the desired setting.
3{SAVE}
4Proceed with the operation for your unit. Base unit: {■} (EXIT)
Handset: {OFF}
Note:
L You can select a line manually regardless of the line selection mode by pressing {LINE 1} or {LINE 2}.
For assistance, please visit http://www.panasonic.com/help | 17 |
