Making/Answering Calls
Making calls
Using the base unit :
1Dial the phone number.
L To correct a digit, press {CLEAR}.
2Lift the corded handset.
L An available line is automatically selected and either the LINE1 indicator or LINE2 indicator lights up. To change the line selection mode, see page 17.
L You can also select the line manually by pressing {LINE 1} or {LINE 2} before lifting the corded handset.
3When you finish talking, place the corded handset on the cradle.
Note:
L You can also dial the phone number after lifting the corded handset.
L To switch to the cordless handset, press {LINE 1} or {LINE 2} on the cordless handset, then place the corded handset on the cradle.
Using the speakerphone
1During a conversation with the corded handset, press
L You can place the corded handset on the cradle.
L Speak into the MIC.
L Speak alternately with the other party.
2When you finish talking, press
Note:
LFor best performance, use the speakerphone in a quiet environment.
L To switch to the receiver, lift the corded handset.
Using the handset Y
1Lift the handset and dial the phone number. L To correct a digit, press {CLEAR}.
2{C}
L An available line is automatically selected and the line number is displayed. To change the line selection mode, see page 17.
L You can also select the line manually by pressing {LINE 1} or {LINE 2}.
3When you finish talking, press {OFF} or place the handset on the charger.
Note:
L The LINE1 indicator or LINE2 indicator on the
base unit lights up while using the handset.
Using the speakerphone
1During a conversation, press {s} to turn on the speakerphone.
L Speak alternately with the other party.
2When you finish talking, press {OFF}.
Note:
LFor best performance, use the speakerphone in a quiet environment.
L To switch to the receiver, press {C}.
Adjusting the receiver or speaker volume
:Base unit / YHandset
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialed are stored in the redial list in each unit (each 48 digits max.).
:Base unit / YHandset
1{REDIAL}
2{V}/{^}: Select the desired phone number.
3Proceed with the operation for your unit. Base unit: Lift the corded handset. Handset: {C}
Erasing a number in the redial list
1{REDIAL}
2{V}/{^}: Select the desired phone number. i{ERASE}
3{V}/{^}: “Yes” i{SELECT}
4Proceed with the operation for your unit. Base unit: {■} (EXIT)
Handset: {OFF}
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When
18 | For assistance, please visit http://www.panasonic.com/help |
