Panasonic manual Specifications, PT-D7500U PT-D7600U

Specifications

		PT-D7500U		PT-D7600U
Model No.
Interface ports
RGB2 input/RGB1 output terminal	1 set of high-density, D-sub 15p (female)
	[For YPBPR input]
	Y: 1.0 V [p-p] synchronization signal included,
	PBPR: 0.7 V[p-p] 75 Ω
	[For RGB input] 0.7 V[p-p] 75 Ω		For G-SYNC: 1.0 V[p-p] 75 Ω
	HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
	VD: TTL, high-impedance, positive/negative polarity automatically adjusted
	• However, HD/SYNC, and VD terminals are not compliant with 3-value
	direct SYNC.
	(Active through for RGB1 output)
Video input/output terminal	1 set BNC
	Y 1.0 V[p-p] C 0.286 V[p-p] 75 Ω		; Compliant with S1 signals
S-video input terminal	1 set Mini DIN 4p
	Y 1.0 V[p-p] C 0.286 V[p-p] 75 Ω
Serial input/output terminal	D-sub 9-pin (female), RS-232C compliant
	Used for personal computer control
Remote1 input/output terminal	1 set each for M3 pin jack
	Wired remote control, used for link control
Remote2 terminal	D-sub 9p (female)
	Used for external control
Length of power supply cord		2.5 m (8.2")
Cabinet		Molded resin
Outside dimensions		Width: 530 mm (20.8"); Height : 200 mm (7.9"); Depth: 569 mm (22.4")
Mass		19.8 kg (44 lb) (without lens)
Working environment condition	*1.Ambient temperature: 0 to 40°C for setting of lamp output at [LOW] and lamp
		selection at [DUAL, LAMP 1, LAMP 2 or SINGLE]
		0 to 35°C for setting of lamp output at [HIGH] and
		lamp selection at [DUAL]
	Ambient humidity: 20 to 80% (no condensation)
Remote control
Power source		3 V DC (two AA dry cells)
Operation range		approx. 7 m/23' (in front of beam receiver)
Mass		110 g (0.24 lb) (including dry cells)
Outside dimensions	Width: 50 mm (1.9"), Thickness: 31 mm (1.2"), Depth: 181 mm (7.1")
Option
Hanging attachment (For high celling)		: ET-PKD75
Hanging attachment (For low celling)		: ET-PKD75S
Dual attachment		: ET-DFD75
Carrying handle		: ET-HAD75
Projection lens		: ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4, ET-D75LE5,
		ET-D75LE1SC, ET-D75LE2SC, ET-D75LE3SC, ET-D75LE4SC
DVI-D input module		: ET-MD75DV
Network module		: ET-MD75NT
Video signal input module		: ET-MD95VM2
RGB signal input module		: ET-MD95RGB
Serial digital input module (SD)		: ET-MD95SD1
Serial digital input module (480p)		: ET-MD95SD2
Serial digital input module (HD)		: ET-MD95SD3
Lamp unit		: ET-LAD7500 (single bulb), ET-LAD7500W (double bulbs)
Wireless mouse receiver		: ET-RMRC1

*1.If the projector is used at high altitude (1 400 to 2 700 m), the value for allowable ambient temperature should be lowered by 5°C.

100