Adjusting the position, Size modes | Panasonic PT-D7500U specs

Adjusting the position

Size modes

•DEFAULT: Pictures are displayed without changing the aspect ratio of the input signals.

•THROUGH: Pictures are displayed without changing the resolution of the input signals.

•ZOOM: Pictures can be displayed in various magnifications. The user can magnify the pictures with the magnification ranging from 50% to 999%, and the fiducial point is set on the top left of the screen.

•4:3: Pictures are displayed in the aspect ratio of 4:3.

•16:9: Pictures are displayed in the aspect ratio of 16:9.

•S4:3: Pictures are scaled down to 75% of the original size without changing the aspect ratio of the input signals. This mode is used when projecting the 4:3 pictures on the 16:9 screen.

•HV FIT: Pictures are displayed on the whole panel pixels.

If the aspect ratio of the input signals is different from that of the panel, the pictures are displayed by converting it into the panels aspect ratio (4:3 for PT-D7500U and 5:4 for PT-D7600U).

•VID AUTO: The projector identifies the video ID (VID) embedded in the picture signals and displays the picture by automatically switching the screen sizes between 4:3 and 16:9.

This function is effective for the video and S-video input.

•S1 AUTO: The projector identifies the S1 signal and displays the picture by automatically switching the screen sizes between 4:3 and 16:9.

This function is effective for the S-video input.

•VID AUTO (PRIORITY): The projector identifies the abovementioned VID or S1 signals and displays the picture by automatically choosing the screen sizes of 4:3 or 16:9 according to the VID if it is detected or S1 signals if a VID is not detected.

This function is effective for the S-video input.

Note Some size modes are not available for certain types of input signals.

•For RGB1 and RGB2 input signals: VID AUTO, S1 AUTO or VID AUTO (PRIORITY) cannot be selected.

•For VIDEO input signals: DEFAULT, S1 AUTO or VID AUTO (PRIORITY) cannot be selected.

•For an NTSC signal with VIDEO or S-VIDEO input: DEFAULT cannot be selected.

58

Image 58

Panasonic PT-D7500U manual Adjusting the position, Size modes

Contents

Commercial Use Model No. PT-D7500U Model number PT-D7500U / PT-D7600U Dear Panasonic CustomerSerial number Page Contents Precautions with regard to safety Precautions with regard to safety Do not use the old lamp unit AccessoriesDo not look into the lens while the projector is being used Lamp section may break Precautions on handling Examples of system expansion When the operation mode selector is set to Projector Remote controlName and function of parts When the operation mode selector is set to Computer Name and function of parts Front and side of the projector Rear view of the main unit Controls on rear panel RGB YPBPR2 input/RGB YPBPR1 output terminal pages 26 Video in terminalVideo OUT terminal REMOTE2 terminal Effective range of remote control operation Using the remote control unitLoading dry cells Using the remote control unit Setting projector ID number to remote controlProcedure of ID setting Using a wired remote control Using the remote control as a PC mouseOperation mode selector switch Adjusting the leveling feet InstallationProjection scheme Installation geometry Size Effective Projection distance SH Effective screen heightInch Screen dimensions Projection distance L Zoom lens InstallationFor the screen aspect ratio Units m feet/inches WidthSW Minimum Maximum ET-D75LE2/SC 2.0-3.0 ET-D75LE2 ET-D75LE1ET-D75LE1SC ET-D75LE2SC Before starting connection Connection・SYNC/Y SDA HD/SYNC SCL Video deck TBC built-in Color monitor Control PC Example of connecting with Video devicesVideo deck TBC built-in High-vision video deck Connection Example of connecting with personal computersControl PC PC or color monitor With RGB input terminals Example of connecting with the signal selector Color monitor with RGB input terminal Installing the input module Installation of input module optionalTypes of the input modules optional Remove the slot cover Procedure of installationRegister the input signal Insert the input module Connecting signals to the input module Installation of input module optional RGB signal input module optional Connecting the signal to the analog RGB signal input moduleConnecting the component signals SUB BNC Connecting the video signals Connecting the signal to the video signal input moduleInstallation of input module optional Video signal input module optional Connecting the component signals Serial digital input module optional ET-MD95SD1 for 480i/576i SD signal Business-use digital video deck ET-MD95SD2 for 480p/480i/576i ET-MD95SD3 for HD SDI Installing the input module optionalAuto Pin No Signal Connecting signals to the DVI signal input moduleDVI-D input module optional How to remove the projection lens How to install the projection lensPull the projection lens Press the l button. on the main unit or the remote control Powering up the projectorMaking adjustment and selection Roughly adjust the focus of the lens. Refer to Powering off the projector Projection How to adjust the lens Choose an item and adjust it using Buttons Automatic adjustment Auto Setup Press the Menu button Registration of input signal dataRegistration of new data Press the Enter button If new registration is not available because of full memory Registration of input signal dataConfirm overwriting registration screen will be displayed Change registered signals screen will appear How to register into sub memoryHow to erase sub memory Sub memory Restrictions On-screen indicationsDesignation can be set by the sub memory items Using the Shutter function Using the Freeze functionUsing the digital zoom D.ZOOM + function On-screen menus Structure of menu screens Basic operations on menu screen Menu items settingResetting to the factory default Returning to the previous screen Switching the AI control Adjusting the pictureSwitching the picture mode Select Picture Mode with the buttons Adjust the level with Buttons Adjusting Contrast / Bright / Color / TintAdjustment procedure to adjust picture color intensity Repeat Steps To adjust BRIGHT, Color or Tint Operation Adjustment Remarks Adjusting the color temperatureAdjusting the picture USER, STANDARD, NATURAL, CINEMA, Graphic Select the desired color for adjustment With the buttons Adjusting color matchingProcedure of adjustment Select Picture with the buttons Press Enter button Adjustment items Operation Sharpness / Gamma / Noise reduction / Pulldown modeSelect Picture with the buttons To set the sRGB compliant picture Signal levelTo input Betacam with YCbCr Smpte Adjusting the position Shift adjustment Size adjustment Size adjustment screen will be displayed Adjusting the position Size modes Blanking adjustment Select Blanking with the buttons Press the Enter button Clock phase adjustment Input Resolution screen will be displayed Adjusting the input resolutionTotal DOTS, Displayed DOTS, Total Lines and Displayed Lines Clamp Position screen will be displayed Adjusting the clamp positionSelect Position with the buttons Press the Enter button Value changes from 1 to Keystone distortion correction Adjust the Keystone horizontally With the buttonsAdjust the vertical Linearity with Buttons Select Keystone with the buttons Press the Enter button To display the adjustment marker Edge blending adjustmentSpecify the area to be adjusted with the buttons Adjustment marker Select the Bright with the buttons Press the Enter button Changing the display languageSelect the Language with the buttons Press the Enter button How to change the system format Select Option with the buttons Press the Enter button Procedure of settingVideo Setting screen will be displayed Option screen will be displayed How to use RGB Reality mode ID number setting Option settingsID number need not be set when only one projector is used Optional settings Installation SettingFRONT-F FRONT-C REAR-C REAR-F Lamp cooling time Lamp powerLamp select RGB2 select Option settings Video settingAutomatic adjustment System information Frame lock Main windowSubwindow Type Password Setting FUNC1List of P in P Mode Setting the contrast modeSelect Option with the buttons Press Enter button ContrastNormal Maximum Brightness Maximum Normal SYNC. Term These buttons toggle between 75 Ω and HI-Z TTLHI-Z TTL Communication conditions Factory setting Using the serial terminalsPin assignments and signal names Examples of connection RS232C Setting screen will be displayed Procedure of setting communication conditionsUsing the serial terminals Press and buttons to select Option Press the Enter button Cable specifications Control commandsConnecting to a PC Computer Projector DTE specifications Sub 9-pin female Using the Remote 2 terminalPin assignments and control External appearance RS-422 control functions Displaying the internal test patternCycle of displayed internal test patterns Example of connection How to use network module optionalName and function of network module parts Network Setting screen will be displayed Initial setting of network moduleMenu screen will be displayed Items Function Description How to use network module optionalPort No Accessing from the Web browser Network setting Top Network setting Projector control Status indication Mail setting Smtp Mail setting page continuing Page For control of image files Indication Indication of monitor lampLamp Information Checkpoint Remedial measure Monitor Clean the air filter Cleaning and replacement of air filterProcedure of cleaning Dismantle the air filter Timing of lamp unit replacement Replacement of lamp unitIndication after 1 300 hours Replacement of lamp unit Procedure of lamp unit replacementYou might get burned if you touch it while it is still hot An item Lamp Reset will be added Press the Enter button. When OK? is displayed, pressUsed hours of the specified lamp unit will be reset to zero Remote control does Symptoms CheckpointPower does not turn on No image appears on Specifications PT-D7500U Specifications PT-D7500U PT-D7600U Compatible RGB/YPBPR Signals Appendix Trademark Acknowledgement Outside dimensions530 Units mminch Concernant LA SÉ Curité Ne pas surcharger la prise de courant Pré cautions concernant la sé curitéNe pas couvrir le filtre et la sortie d’air Ne pas retirer le couvercle ou le modifier Ne dé montez pas le bloc lampe Ne pas placer le projecteur sur des surfaces instablesNe pas placer des ré cipients de liquide sur le projecteur Ne pas mettre d’objets é trangers dans le projecteur Nutilisez pas un bloc lampe usagé Pré cautions concernant la sé curité’utiliser que la pile indiqué e Cela peut entraîner une rupture de la lampe Pré cautions pour la manipulation Nettoyage et maintenanceMise au rebut Remplacement de la lampe Indication aprè s 1 300 heures Procé dure de remplacement de la lampe Remplacement de la lampe Remplacement de la lampe 111 800 FAX 201 Mail pbtssupport@panasonic.com Professional/Industrial VideoTechnical Support Panasonic Canada Inc