Panasonic PT-D7500U Procedure of setting, Select Option with the buttons Press the Enter button

How to change the signal for the ET-MD95VM2 (optional)

When ET-MD95VM2 (optional) is installed with the projector, select the signaling system according to the connected device.

Procedure of setting

MAIN MENU

PICTURE

POSITION

LANGUAGE

OPTION

TEST PATTERN

RESISTERED SIGNAL LIST

:MENU SELECT

ENTER:SUB MENU

OPTION

	SYSTEM INFORMATION
	VIDEO SETTING
	FAN CONTROL	NORMAL
	P IN P	ON
	FUNC1	P IN P
	CONTRAST MODE	OFF
	PASSWORD
	:MENU SELECT
ENTER:SUB MENU

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select “OPTION” with the buttons.

Press the “ENTER” button.

The OPTION screen will be displayed.

Select “VIDEO SETTING” with the buttons.

Note • When buttons are displayed above or under the items in the “PICTURE” or “OPTION” screen, they indicate that there are more adjustment (items).

Press the “ENTER” button.

The VIDEO SETTING screen will be displayed.

Choose an input signaling system with

the buttons and switch to “LINE or Y/C” or “YCbCr” with the buttons.

The selected signaling system appears.

(The picture may be distorted during the switching operation.)

If “LINE or Y/C” is selected, choose a

video system with the buttons and switch to “AUTO1” or “AUTO2”

with the buttons.

The selected signaling system appears.

(The picture may be distorted during the switching operation.)

Press the “MENU” button three times.

The on-screen indications disappear and the set screen appears.

67