Panasonic PT-D7500U manual Network setting Projector control

Network setting page

Projector control page

Pressing these buttons controls the projector and updates the on-screen description on the right of the control page when control is finished.

Select ON to enable the

DHCP client function.

Enter the IP address if

DHCP server is not used.

Enter the port number. Normally use the value of 80 as indicated.

Enter the net mask if

DHCP server is not used.

Enter the gateway address if DHCP server is not used.

Enter the projector name. Enter this field when the host name is required such as when to use the DHCP server.

On-screen status is displayed, even if the on-screen of projector is set to off.

This button updates the on-screen description on the right of the control page with the latest information.

87