How to use RGB REALITY mode
RGB REALITY mode converts RGB (primary colors) input signals into component signals and achieves the high- quality playback by
This mode is effective only when the signal input is applied to the RGB input signal module
RGB mode: For RGB signals input from a PC etc. (mostly still images)
RGB REALITY mode: For RGB signals input from a scan converter etc. (mostly motion images)
The following are the signals that can be converted into RGB REALITY mode:
Signal name | fH(kHz)/fV(Hz) | RGB mode | RGB REALITY mode | Remarks |
480i | 15.73/60 |
|
|
|
576i | 15.63/50 |
|
|
|
480p | 31.47/60 |
|
|
|
720/60p | 45.00/60 |
|
|
|
1035/60i | 33.75/60 |
|
|
|
1080/60i | 33.75/60 |
|
|
|
1080/24p | 27.00/24 |
|
|
|
1080/50i | 28.12/50 |
|
|
|
1080/30p | 33.75/30 |
|
|
|
1080/25p | 28.12/25 |
|
|
|
1080/24sF | 27.00/48 |
|
|
|
Others |
|
|
| RGB mode only |
: Supported (Factory default)
: Supported (To use the signal in the mode with 
, select the signal with the SYSTEM SELECTOR button and register it.)
: Use the signal in the RGB REALITY mode because the signal may not be supported depending on the state of the signal.
: Not supported
Note • The automatic picture adjustment (page 42) and the adjustment of the input resolution (page 61) cannot be performed because the optimal adjustment value is preset in the RGB REALITY mode.
•The projector's adjustment functions in the RGB REALITY mode are the same as those for the YPBPR (or YCbCr) input.
68
